ADP-XC7K160/410

FPGA Based Development Platform

General Description

ADP-XC7K160/410 is a multi-purpose development and prototyping board that provides rich capacity for evaluation of variety of AndesCore™ processors and AndeShape™ SoC platform IPs. It works with AndeSight™ software development suites and AICE in-circuit debugging tools. It also utilizes Xilinx Kintex 7 FPGA built-in hi-speed I/Os to support DDR3* and PCI-E interface for better system performance.

ADP-XC7K160/410 supports numerous peripheral interfaces and allows developers to add expansion cards for custom peripherals and devices. Developers can test and optimize the hardware and software components with a fast turnaround time between system designs, hence reducing development time, cost, and risk. Please note that Figure 1 shows the green PCB is ADP-XC7K160 and Figure 2 shows the red PCB is ADP-XC7K410.

Figure 1 ADP-XC7K160

Figure 2 ADP-XC7K410

Feature Highlight

Feature

  • Xilinx Kintex-7 FPGA XC7K160T/410T
  • Encrypted Bitstream support
  • 1 GB on-board DDR3*-800 SDRAM
  • 128MB on-board NOR flash; 64MB for FPGA configuration, and 64MB for system storage
  • 2MB SPI Flash
  • 16KB I2C EEPROM
  • 10/100 Ethernet RJ45 port
  • DB9 UART port
  • SD memory card slot
  • IDE/GPIOs connector
  • 10 and 20 pins AICE ports
  • 8 user defined push buttons
  • LCD module connector
  • MIC-in, Line-in, and Line-out with AC97 audio codec
  • Two 7-segment LED displays

*This feature requires Xilinx’s IP support 

Development Tools and Platforms

  • AndeSight™ version 2.0.0 or later
  • AndeShape™ Board Support Package(BSP)